E-mail: amy@bjgreenpower.com   WhatsApp/wechat: +8618500983665
Home > Products > DC Power Supply

300A 400A 15V Electroplating Power Supply With Dsp Control Touch Panel HMI

300A 400A 15V Electroplating Power Supply With Dsp Control Touch Panel HMI
300A 400A 15V Electroplating Power Supply With Dsp Control Touch Panel HMI. Adopts high frequency IGBT as semiconductor component and PWM modulation technology. It is modular structure design, easy to expand output current capacity, Touch panel HMI makes it easy and convenient for display and control to the rectifier, realizing setting voltage and current, setting working mode, rectifier start/stop, readout of operational data and faults and inquiry of history data.
Product Details:

300A


Application:

300A 400A 15V Electroplating Power Supply With Dsp Control Touch Panel HMI.

Adopts high frequency IGBT as semiconductor component and PWM modulation technology. It is modular                       structure  design, easy to expand output current capacity, 

Touch panel HMI makes it easy and convenient for display and control to the rectifier, realizing setting voltage and           current, setting working mode, rectifier start/stop, readout of operational data and faults and inquiry of history data. 

image


    GP Electroplating IGBT Rectifier Advantages

1. Power saving because of GP IGBT rectifier has higher efficiency than SCR rectifier

2. Modular structure, small size, standard module about 1/6 size of SCR/Diode rectifier   

3. Anti corrosion treatment:

Have corrosion proof coating (powder coated cabinet) to protect from corrosive environment. 

All the PCB assemblies is humi- sealed/lacquer coated.

Partially sealed designs protect critical electronics from harsh environment.

Stainless steel bolts, nuts, screws etc are used.

4. Wide range input voltage: +/-20% input voltage

5. Reliable quality, 100% output 365 days, 24 hours non-stop continuous running

6. Touch panel, protection automatic alarm and fault indication, history data record, output waveform

7. Amperehour counting function

8. Timer function

9. Suitable for hot temperature environment

10. Digital control to ensure control more than 15 years reliable

11. RS485, 4-20mA, 0-10V PLC remote control interface

12. Short circuit, output over current, over heat, IGBT driving fault protections

13. Easy maintenance


Technical Parameters

TypeIGBT high frequency rectifier 
StructureModular design
Working duty100% 24 hours continuous running 
Input voltage380VAC ±20% 3 phase 4 line, 50-60Hz
Rated output voltage12V/15V/18V/20V
Rated output current300A/400A
Output range0-100%
Control Accuracy≤±1%
Power factor≥0.94
Efficiencytypical 90% at rated output, has relation with output voltage
Control modeconstant current/constant voltage
Operation modeLocal, Remote
Current ripple

Standard ≤10% of rated output current at constant current mode, low ripple in whole range, provide good plating quality.

As low as 1% available based on customer demand

CoolingAir cooling 
Protection classIP32
HMITouch Panel on control box
Remote control interfaceRS485, 4-20mA, 0-10V, Profibus, Profinet available
Alarm typeAudible and visual alarm
ProtectionsOutput overcurrent protection 

Over heat protection

IGBT Driving protection
Ambient tempMax. 40℃, derated operation up to 50℃


Rectifier Front view

image


 

Rectifier Back view



image


Touch Panel Display

image

(1) Communication Status:

Flush green imply communication is OK, always red imply communication is failure

(2) Output DC output and voltage.

(3) AmpereHour counting display

(4) Timer counting display

(5) Running mode display

Control Mode: Local control (control by touch pane) or Remote control

Output Mode: Constant Voltage or Constant Current

(6) Running status display


Electroplating Case

image


If you need other power electroplating rectifier, we could custom design according to the customer requirements. Please contact us.


Looking for 300a 400a 15v electroplating power supply with dsp control touch panel hmi? Green Power Technology is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.
Hot Tags: 300a 400a 15v electroplating power supply with dsp control touch panel hmi China, India, manufacturers, factory, customized, high quality, price
Related Products
Feedback: