E-mail: amy@bjgreenpower.com   WhatsApp/wechat: +8618500983665 Chinese
Home > Products > Rectifier > IGBT Rectifier

Seawater Electrolysis Switch Mode Rectifier for Producing Sodium Hydroxide Chlorine Gas Hydrogen Gas

Seawater Electrolysis Switch Mode Rectifier for Producing Sodium Hydroxide Chlorine Gas Hydrogen Gas
IGBT switch mode electrolysis rectifier ' s a pplication range The switch mode electrolysis rectifiers as ac dc power supply to provide dc source, for various electrolysis process where it needs relatively lower power below 500kw, such as Electrolysis ofion-exchange membrane Caustic soda (NaOH),...
Product Details:

Seawater Electrolysis Switch Mode Rectifier for Producing Sodium Hydroxide Chlorine Gas Hydrogen Gas


1. IGBT switch mode electrolysis rectifier's application range

The switch mode electrolysis rectifiers as AC-DC power supply to provide dc source, for various electrolysis process where it needs relatively lower power below 500kw, such as Electrolysis ofion-exchange membrane Caustic soda (NaOH), sodium hydroxide,potassium hydroxide, copper foil, salt solution,seawater desalination Electrodialysis(ED), DC power supply for nonferrous metals electrowinning from melts (aluminum, magnesium) and solutions (zinc, copper, nickel, sodium, cadmium, lead, manganese, water, etc.);power supply of electrolysis units for gas production Chloro, Fluoro,Hydrogen fluoride, producing chlorine (Cl2) by electrolysis of brinein the process of Chlor-Alkali (CA), and caustic soda and hydrogen are generated together, Chlorine (Cl2) is used as a raw material for the PVC process, isopropyl cyanide process and phenol process and rectifier for electrolysis of fused salt. 

For 500kw above power demand for electrolysis, it's recommended to use SCR based rectifier.  

Switch Mode Rectifier.png
2. Green Power ac dc switching power supply advantages

3. Block diagram of the dc rectifiers
The switch-mode rectifier is working at the following diagram:
The mains rectifier bridge converts the voltage into DC voltage. The IGBT modules power electronicsthen convert the DC voltage pulse width modulated into a alternating voltage. The internal transformerrealizesisolation and voltage adjustment on the secondary side. On the output side rectification is achieved by fast power diodes. Aconstant smoothed and fully controllable DC voltage is generatedatthe output side.
The switch-mode rectifier is working at the  diagram.gif

4. Technical R&D ability of the dc rectifiers 


5. Technical parameters of the dc rectifiers 

Input voltage

Single phase 220VAC for rectifier below 3kw.
3 phase 230VAC, 380VAC, 415VAC, 440VAC, 480VAC, 550VAC, 600VAC
50-60Hz

Output DC current

Up to 50kA

Output DC voltage

Up to 500V

Output regulation range

0-100% of max currentor voltage

Control accuracy

1/1000 of max current or voltage

Operation Mode

Constant current and constant voltage, constant power

Ripple

<3% on request

Efficiency

>92% (>= 100VDC) @rated load

Degree of Protection

IP30 for air cooling
IP44, IP54 for water cooling on request

Power factor

>0.93 @ rated load

Insulation grade

B

Working mode

100% 24 hours continuous running

Alarm type

Audible and visual alarm

Cooling method

Air cooling/water cooling

Available Interfaces with PLC

Analogue 0-10V
Analogue 4-20mA
RS485(MODBUS)
RS232
Profibus-DP
Profinet

Operation Modes

Manual, Automatic

Protections

Short circuit protection
Over/under input voltage protection
Driving protection
Over heat protection
Over current protection
Over voltage protection

6. Installation and connection  of the dc rectifiers 
The rectifier should be installed in the environment with the following conditions

Connect the rectifier with AC input, DC load and remote control interface from back side of the rectifier. The operation such as set constant voltage/constant current, set local control/remote control, ON/OFF is conducted on the touch panel or through remote control interface such as 4-20mA/0-10V, RS485, RS232, Profibus, Profinet etc. Our rectifier can be used inside the generator by remote control.

Switch Mode Rectifier.png


7. Package and Shipment  of the dc rectifiers 
The rectifier is packed in strong plywood material wooden package, withstand long distance air shipping or sea shipping.

image011.png

8.Customer feedback about seawater electrolysis for hydrogen by our swith mode rectifier:

Customer feedback on Hydrogen Rectifier.png

Looking for switch mode rectifier for electrolysis seawater electrolysis producing sodium hydroxide chlorine gas hydrogen gas? Green Power Technology is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.

Related Products
Feedback: